Downhole motor is a king of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a dump value into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the motor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
We can supply difference types of downhole motor, from 60 to 244mm in diameter, 3.5MPa, 7MPa and 14MPa pressure series, including single lobe and multi-lobe, single bent and double bents motors, which can match different kinds of stabilizers. Chinese manufacturers have the ability to develop a variety of down-hole motors in independence.

Detail Specification:

Drill tool type		5LZ73 ×7.0	5LZ89 ×7.0	5LZ95 ×7.0	7LZ95 ×7.0	9LZ95 ×7.0	7LZ102 ×7.0	5LZ 120 ×7.0 IV	5LZ 120 ×7.0 III	5LZ 165 ×7.0	5LZ 165 ×7.0 IV
Hole size	in	3 1/2~ 4 3/4	4 1/2 ~6	4 5/8~ 6	4 5/8~ 6	4 5/8~ 6	4 5/8~ 6	5 7/8~7 7/8	5 7/8~ 7 7/8	8 3/8~ 9 7/8	8 3/8~9 7/8
Advise flow	l/s	2~4	3~8	7~12	8~13	6~10	8~13	9~14	9~16	20~28	20~28
Drill speed	rpm	125~270	95~250	90~240	80~205	90~185	80~205	95~250	95~250	90~200	90~200
Motor pressure drop	Mpa	2.4	2.4	3.2	2.4	2.4	2.4	2.4(3.2)	2.4	2.4	3.2
Working torque	N.m	320	560	1100	1200	900	1200	1350(1800)	1700	3300	4500
Output power	Kw	4.2~7.4	5.6~11.7	10.4~22.5	10~20.7	8.5~14	10~20.7	13.4~28.3 (17.9~37.7)	16.9~35.6	11.1~55.3	42.4~75.4
Circulating opening pressure drop	Mpa	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7
Advise bit load	MT	1.5	2	2.5	2.5	2.5	2.5	3 (4)	3	6	8
Max bit load	MT	2	3	5	5	4	5	5	5	16	16
Length	mm	3670	2700	4200	4035	4389	4185	3900	4555	5700	6930
Upper end worm	REG	2 3/8	2 3/8	2 7/8	2 7/8	2 7/8	2 7/8	3 1/2	3 1/2	4 1/2	4 1/2
Lower end worm	REG	2 3/8	2 3/8	2 7/8	2 7/8	2 7/8	2 7/8	3 1/2	3 1/2	4 1/2	4 1/2
AKO		0.25°, 0.5°, 0.75°, 1°, 1.25°, 1.5°, 1.75°, 2°, 2.25°, 2.5°
DTU		0.6°, 0.75°
FAB		1°×2.5°, 1°×0.5°, 1°×0.75°, 1°×1°, 1°×1.25°, 1°×1.5°, 1°×1.75°, 1°×2°, 1°×2.25°, 1°×2.5°

Drill tool type		5LZ 165 ×7.0V	5LZ 165 ×7.0VI	5LZ172 ×7.0IV	5LZ172 ×7.0V	9LZ172 ×7.0IV	5LZ197 ×7.0	9LZ197 ×7.0	5LZ215 ×7.0	5LZ244 ×7.0	9LZ244 ×7.0
Hole size	in	8 3/8~ 9 7/8	8 3/8~ 9 7/8	8 3/8~9 7/8	8 3/8~9 7/8	8 3/8~ 9 7/8	9 7/8~ 12 1/4	9 7/8~ 12 1/4	12 1/4~ 15 1/4	12 1/4~ 17 1/2	12 1/4~ 17 1/2
Advise flow	l/s	20~28	20~28	25~35	25~35	20~30	19~ 38/58	22~ 36/55	30~50	50~75	50~75
Drill speed	rpm	90~200	90~200	90~200	90~200	85~160	90~200	85~155	100~200	100~ 205	75~160
Motor pressure drop	Mpa	4.0	4.8	3.2	4.0	3.2	3.2	3.2	3.2	2.4	3.2
Working torque	N.m	5600	6700	5300	6600	5200	8500	9000	11000	9000	13000
Output power	Kw	52.8~ 93.8	63.1~ 112.3	49.9~ 88.8	62.2~ 110.6	43.6~ 69.1	80.1~ 142.4	80.1~ 117.8	115.2~ 184.3	94.2~ 155.5	102.1~ 177
Circulating opening pressure drop	Mpa	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7
Advise bit load	MT	10	12	8	10	8	16	16	17	18	22
Max bit load	MT	16	16	16	16	16	24	24	28	30	33
Length	mm	7800	8475	6890	7790	6205	8200	8500	8780	7200	7200
Upper end worm	REG	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	5 1/2	5 1/2	6 5/8	6 5/8
Lower end worm	REG	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	6 5/8	6 5/8	7 5/8	7 5/8
AKO		0.25°, 0.5°, 0.75°, 1°, 1.25°, 1.5°, 1.75°, 2°, 2.25°, 2.5°
DTU		0.6°, 0.75°
FAB		1°×2.5°, 1°×0.5°, 1°×0.75°, 1°×1°, 1°×1.25°, 1°×1.5°, 1°×1.75°, 1°×2°, 1°×2.25°, 1°×2.5°

Теги

Способ доставки: Доставка транспортной компанией, Доставка почтой, Курьер, Самовывоз, Доставка продавцом

Предложения < 15 / 25 >

PDC Долото

Forging

Наши предложения в системе FIS на площадке «Буровой инструмент в Сиани», «Буровой инструмент» - предложения нашей компании по всей России

Пожаловаться на информацию